GSE

h1. Perforce

For installation executable, download file, p4vinst64.exe, listed below in the file section at the very bottom of this page. (you might have to manually expand the file section triangle).

h2. Step 1 - Run the install file, select "Next"

!picture425-1.png! 

 

h2. Step 2 - Keep default selections, select "Next"

!picture624-1.png!

 

h2. Step 3 - Set Server to values below, set your User Name, select "Next"

!picture799-1.png! 

 

h2. Step 4 - Select "Install"

!picture895-1.png!

 

h2. Step 5 - Select "Close"

!picture655-1.png!

 

h2. Step 6 - To start Perforce select "P4V"

!{width:500px}picture843-1.png!

 

h2. Step 7 - Default startup dialog should appear, should have the proper Server and User set from Perforce installation Step 3 above. Select "OK"

!picture639-1.png! 

 

h2. Step 8 - Check the "Trust this fingerprint" button

!picture850-1.png!

h2. Step 9 - Check the "Trust this fingerprint" button

!picture710-1.png!

h2. Step 10/11 - Check the "No" buttons for the following options

!picture132-1.png! !picture371-1.png!

!picture26-1.png! !picture343-1.png!

!picture241-1.png! !picture264-1.png!

!picture631-1.png! !picture623-1.png!

!picture465-1.png! !picture841-1.png!

!picture99-1.png! !picture227-1.png!

!picture307-1.png!